• Open the e-catalogue page
• Download the catalogue page

Memmert incubators I are at home in the world of research, medicine, pharmaceutics and food technology. Organic chamber loads require gentle heating. For this reason, the heating and control system are especially optimised for low temperatures of up to +80 °C. To prevent temperature overshoots, temperature is increased within a very narrow control range and kept exactly at the setpoint value. Models with natural convection or with forced air circulation are available.

• Setting temperature range +20 °C to +80 °C
• Double doors: outside stainless steel, inside glass- All-round heating on all 4 sides for excellent temperature homogeneity
• Fresh air is preheated
• The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points
• optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber
• Internal data logger with storage capacity of at least 10 years
• Works calibration certificate at +37 °C
• Warranty is 3 years on parts, 1 year on labour

SingleDISPLAY:

• ControlCOCKPIT with one high-resolution TFT colour touch display
• Available parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), fan speed, exhaust air flap position, programme time, time zones, daylight-saving time
• One temperature sensor Pt100 DIN class A in a 4-wire circuit
• AtmoCONTROL software for reading out, managing and organizing the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand)
• Ethernet interface for reading out protocol log and for online logging
• Double overtemperature protection: Electronic temperature monitoring with freely adjustable monitoring temperature TWW/TWB (protection class 3.1 or 2), mechanical temperature limiter TB acc. to DIN 12880

TwinDISPLAY:

• ControlCOCKPIT with two high-resolution TFT colour touch displays
• Available parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), fan speed, exhaust air flap position, program time, time zones, daylight-saving time
• Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error
• HeatBALANCE function for application specific adjustment of heat output distribution (balance) between the upper and lower heating groups in an adjustment range between -50 % and +50 %
• AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port
• Intuitive programming and archiving of ramps and program sequences
• Synchronous visualisation of the created program sequence during programming
• Application-specific repeat functions (loops) can be inserted within a temperature control program in any place
• Simple creation of repeating weekly programs
• ControlCOCKPIT with USB port for uploading programs, reading out protocol logs, activating the User-ID function
• Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
• Ethernet interface for reading out protocol log, uploading programs and for online logging
• Multiple over temperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.1 or 2) and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual
• MIN / MAX values for over/under temperature alarm